Autowatch Ghost Installation
Autowatch Ghost is a revolutionary immobiliser system that guards against key-cloning and hacking and vehicle theft. It can also help reduce the cost of insurance and could even be eligible for incentives.
Easy to use and discrete and simple to use, easy to use, the Ghost immobiliser is integrated into the vehicle's ECU. This makes it impossible for the engine to start without a secret code.
TASSA Approved
Autowatch Ghost is the best method to prevent your car from being stolen by key copying. It has been certified by TASSA. This is the latest in car security technology and thwarts thieves two ways - it will stop your car from starting if your keys are duplicated, and it will stop you from driving away if thieves have stolen your existing key fobs.
The Ghost is the next generation and is connected to the CAN data network of your vehicle. A unique PIN code can be entered using the standard buttons on the dashboard, or steering wheel. The Ghost will then stop the engine from beginning and can be programmed to a variety of different settings like Gear Change Blocking, Stall on Start or Lock Gearbox (vehicle dependent). It is completely undetectable and does not use radio frequency signals so that it cannot be detected by RF scanning equipment or a code grabber.
The Ghost is a small, weatherproof device that is completely sealed. It can be placed on the dashboard or within the vehicle. Contrary to other alarms and immobiliser systems on the market, this isn't an Thatcham Category approved product, but is recognized by insurance companies as an effective anti-theft device. It also comes with 5 years of warranty.
The TASSA process ensures that any installation work on the Ghost is carried out by a trained installer. This gives the customer, insurers and police confidence in the quality of any installation that is completed. It also ensures that the installers abide by the directions of the product manufacturer and properly install the product. Installers who are TASSA members have a commitment to excellence and desire to contribute to the fight against crime.
Compatible with a broad range of vehicles
The Autowatch Ghost 2 immobiliser is an advanced device that protects your vehicle from key cloning. The PIN code system of the Autowatch Ghost 2 is built into the ECU of your vehicle, making it harder for thieves to clone keys or hack into the system. Additionally the device is discrete and can be easily installed in a range of vehicles including minivans, sports cars. It is also weatherproof and small enough to hide away from view making it harder for thieves to spot.
Installation of the Ghost is simple and does not require any additional wiring. It is compatible with numerous vehicles and communicates via the vehicle's data network, CAN. It can also be disabled or turned off from the main display of the vehicle. The device is compatible with numerous mobile apps that permit you to manage the security of your vehicle remotely.
Despite its many benefits, despite its many benefits, Ghost has some issues that can be encountered after installation. These issues could be caused by a variety of factors including defective wiring or an incompatible mobile app. In these instances, calling an expert installer is the best way to resolve the problem.
Another problem encountered by users is difficulty entering the sequence of disarming the Ghost. This is usually due in part to forgetting the correct sequence or not rehearsing it. However, the device's manual includes an emergency code that can be used in the case of such issues.
Discreet
Autowatch Ghost is a discreet and sophisticated security system that guards your vehicle from theft. This device uses the CAN data network of your vehicle to operate and is invisible to thieves, which makes it an extremely effective deterrent. It is also triggered by security systems, such as car alarms and sends real-time alerts to its owner. These features can aid the police find your vehicle in the event of theft.
This system is compatible with most vehicles and can be installed in under an hour. It's a TASSA-approved aftermarket product that's compatible with vehicle trackers, and is even recognized by a few insurance companies. It's also tamper-proof and silent so that criminals won't be in a position to hear it working. The Ghost immobiliser is also programmable to require a PIN that is up to twenty numbers. This makes it virtually impossible to guess.
Ghost can only be used when the vehicle is in the Service/Valet Mode. This means that you aren't giving the PIN number to a mechanic or other person who might need to access the vehicle's computer system. The Ghost comes with five years of warranty.
The Autowatch Ghost immobiliser is a groundbreaking security system that prevents key cloning, ECU hacking and car theft. It's a CAN bus aftermarket device that is a great option for both new and old vehicles. It's simple to install and runs quietly, so it can be installed in any vehicle without cutting wires. You can also alter your pin easily so that only you know it. It is also unnoticeable because it doesn't utilize RF scanning technology, or code-grabbing technology.
Simple to use
Autowatch Ghost is an innovative and effective security system designed to thwart vehicle theft by shutting off the engine. It operates by using a code that is personalised by the owner of the vehicle. The code must be entered to allow the car to start. This technology is advanced and enhances the overall security of your vehicle making it a preferred choice for many drivers. The installation process isn't without its challenges. It requires careful planning and attention to details. This includes ensuring compatibility, using a professional's knowledge, adhering legal regulations, and understanding the Ghost II’s operational dynamics. Making these factors a priority will ensure a successful installation and the best performance.
The Ghost II is a silent system that is not spotted by thieves. It is also tiny and weatherproof, making it very difficult to break in. It is compatible with CAN, Lenastark and other vehicles. It is also able to be used in vehicles that require isolation of the battery for maintenance. The Ghost 2 also has a Transport Mode, which disables the device when your vehicle is being loaned or rented out.
Before Recommended Web page can start the Ghost 2, you will be required to enter a pin code that is unique to you. The installer will assign an initial PIN code for you, but for your own security it is recommended to change it as quickly as possible. The device is able to enter sleep mode to preserve the battery, however should it detect a signal from the engine management system it will wake up and prevent the vehicle from starting. This function can be turned off within the Settings menu. It is advised to use the Ghost immobiliser while your vehicle is being driven, and to lock it before leaving it unattended.
Easy to install
The Autowatch Ghost II is an advanced security system that deters car theft by disabling the vehicle's engine. It operates with a code that is unique to the owner, which makes it a powerful deterrent. However, the installation process requires careful preparation and a keen eye for detail. By ensuring compatibility, relying upon expert expertise and adhering to the legal requirements and fully understanding the system's workings it is possible to ensure a smooth installation and get the most benefit from this security device.
This innovative CANbus immobiliser from Autowatch is simple to install, and operates quietly, so that criminals can't hear it working. It uses the CAN bus to communicate with your vehicle and is compatible with a wide range of vehicles. It is a real revolution in vehicle security. It also shields your vehicle from key cloning, hacking and theft of your car, since it will not start without the correct pin code. It is small and weatherproof, making it hard for criminals to alter or spot.
You will need to locate the CAN High (CAN H) and the CAN Low (CAN L) Wires in the wiring schematic of your vehicle before you can begin installing the Ghost Immobiliser. Then connect the CAN high to the CAN low and connect the low wire to the ECU. The wires are located under the dashboard, or close to the engine.
It's best to hire an experienced and reputable installer to install your Ghost immobiliser. You can be assured that the system will be properly installed and won't disrupt your vehicle's operation. The installer will also be able to provide you with advice on how to best use your new device.